VENTS TT PRO 200 in Kenya, Uganda and Tanzania - Image 2

VENTS TT PRO 200 in Kenya, Uganda and Tanzania

VENTS TT PRO 200 Technical Specifications

Specification	TT PRO 200
Product type	Inline mixed-flow fan
Brand	VENTS
Model	TT PRO 200
Duct connection	200 mm
Actual duct diameter	199 mm
Motor type	AC
Impeller type	Mixed-flow
Motor speeds	2
Supply voltage	230 V
Frequency	50/60 Hz
Rated power	76 / 108 W
Current	0.34 / 0.48 A
Maximum airflow	830 / 1,040 m³/h
Sound pressure at 3 m	39 / 45 dB(A)
Maximum transported air temperature	60°C
Protection rating	IPX4
Weight	3.95 kg
Width	239 mm
Height	261 mm
Length	295.5 mm
Casing	Plastic / polypropylene
Installation	Any position

The manufacturer’s specifications list the TT PRO 200 at 830 m³/h on the lower speed and 1,040 m³/h on the higher speed.

Categories: Air Conditioning Systems / H, Fans

Description
Reviews (0)

VENTS TT PRO 200 Inline Mixed-Flow Fan

Pamon Ventures supplies the VENTS TT PRO 200 inline mixed-flow fan in Kenya for ventilation, air extraction and air supply applications.

The VENTS TT PRO 200 is a 200 mm mixed-flow inline fan designed for installation directly within round ventilation ductwork. It features a two-speed AC motor and can deliver airflow of up to 1,040 m³/h. The fan can be installed in different positions and is suitable for continuous operation under the manufacturer’s specified conditions.

The TT PRO 200 is suitable for commercial, residential and industrial ventilation systems where efficient air movement and relatively compact installation are required.

TT PRO 200 Airflow

The VENTS TT PRO 200 provides two operating speeds:

Low speed: 830 m³/h
High speed: 1,040 m³/h

The two-speed configuration allows the fan to operate at a lower airflow when full ventilation capacity is not required.

TT PRO 200 Applications

The VENTS TT PRO 200 can be used for suitable:

Air extraction systems
Fresh-air supply systems
Commercial ventilation
Residential ventilation
Bathroom ventilation
Kitchen ventilation
Office ventilation
Workshop ventilation
Industrial ventilation
Ducted exhaust systems
General air circulation

The manufacturer’s documentation describes the TT PRO series as mixed-flow inline fans for supply or extract ventilation.

200mm Inline Fan

The TT PRO 200 is designed for connection to approximately 200 mm round air ducts.

Its compact inline configuration allows the fan to be installed within the ventilation duct rather than requiring a conventional wall-mounted fan arrangement.

The fan dimensions are approximately:

239 mm × 261 mm × 295.5 mm

This makes it suitable for installations where available space is limited.

TT PRO 200 Motor & Control

The TT PRO 200 uses an AC motor with two speed settings. The standard model operates from a 230 V single-phase supply, with 50/60 Hz versions specified by the manufacturer.

Certain TT PRO variants are available with additional control features such as a built-in speed controller, timer or thermostat depending on the exact model suffix.

Confirm the required TT PRO 200 variant before ordering.